1.

The Effects of Temperature and Additives on the Microstructure of Al2TiO5

Melih Özçatal, M.Serhat Başpınar

Department of Metallurgical and Materials Engineering, AfyonKocatepe University, Afyonkarahisar, Turkey

2.

Examination of Wear Behavior of NiMo, Citomangan Hardfacing Coated Electrodes and Hardfacing Deposits Formed by Liquid Nitriding

Mehmet Çakmakkaya, Necip Selçuk

Department of Automotive Engineering, Faculty of Technology, Afyon Kocatepe University, Turkey

Department of Metallurgical and Materials Engineering, Faculty of Technology, Afyon Kocatepe University, Turkey

3.

Solution of the Moving Oscillator Problem using the Newmark's β Method

Mehmet Akif Koc, Ismail Esen, Huseyin DAL

Research Assistant, Department of Mechanical Engineering, Sakarya University, Sakarya, Turkey

Associate Professor, Department of Mechanical Engineering, Karabuk University, Karabuk, Turkey

Associate Professor, Department of Mechanical Engineering, Sakarya University, Sakarya, Turkey

4.

Investigation of Using Brass Particles in Automotive Brake Linings

İlker Sugözü

Assistant Professor, Department of Automotive Engineering, Technology Faculty, Mersin University, Mersin, Turkey

5.

Effect of BaSO₄ on Tribological Properties of Brake Friction Materials

Banu Sugözü , Behcet Dağhan

Ph.D Student, Institute of Natural and Applied Sciences, Selcuk University, Konya, Turkey

Associate Professor, Department of Mechanical Engineering, Faculty of Engineering, Selcuk University, Konya, Turkey

6.

Forced Vibration Responses of Functionally Graded Viscoelastic Beams under Thermal Environment*

Şeref Doğuşcan Akbaş

Associate Professor, Dr., Department of Civil Engineering, Bursa Technical University, Bursa, Turkey

7.

Transportation of Pb(II) ions with D2EHPA as Carrier by MDLM System

Ömür DURMAZ, Ramazan DONAT, Halil CETİŞLİ

R. A. Department of Chemistry, Faculty of Sciences Arts, Afyon Kocatepe University, Afyon, Turkey

Asst. Prof., Department of Chemistry, Faculty of Sciences Arts, Pamukkale University, Denizli, Turkey

Prof., Dr. Department of Chemistry, Faculty of Sciences Arts, Pamukkale University, Denizli, Turkey

8.

Synthesis of Si3N4 Powder by Carbothermic Reduction in Nitrogen

Fatih Çalışkan, Engin Kocaman

Associate Professor, Department of Metallurgical and Materials Engineering, Faculty of Technology, Sakarya University,Turkey

Research Assistant, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Bülent Ecevit University, Turkey

9.

Kinetic and Solid State Degradation of Chitosan-Methacrylic acid-N,N-methylenebisacrylamide (Cs-MAA-MBA) Dual-responsive Hydrogels

Muhammad Bisyrul Hafi Othman, Hazizan Md Akil, Abbas Khan, Zulkifli Ahmad, Siti Zalifah Md Rasib

School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal Pulau Pinang

Department of Chemistry, Abdul Wali Khan University Mardan, 23200 Pakistan

10.

Characterization of Tensile Properties And Toughness Mechanisms on Nano-Al₂O₃ Epoxy Nanocomposites

Halil Burak Kaybal, Hasan Ulus, Ahmet Avcı

Ph.D. Student, Department of Mechanical Engineering, Selcuk University, Konya, Turkey

Professor, Department of Mechanical Engineering, Selcuk University, Konya, Turkey

11.

Closed-Form Elasticity Solutions to Uniform Rotating Discs Made of A Radially Functionally Graded Material

Vebil Yıldırım, Cem Boğa

Department of Mechanical Engineering, Çukurova University, 01330 Balcalı, Adana, Turkey

Çukurova University Vocational School of Adana, 01160, Çukurova, Adana, Turkey

12.

The Influence of Ag Addition on The Mechanical Properties of Bi-2212/Ag Ceramic Composites by Fabricated Hot Pressing Technique

Funda Kahraman

Associate Professor, Department of Mechatronics Engineering, Mersin University, Turkey

13.

A Simple Approach to DC Motor Modeling and Comparative Implementation of PI and FLC for its Speed Controlling

Hafeezul Haq, Halil Ibrahim Okumus

P.G. Student, Department of Electrical & Electronics Engineering, Karadeniz Technical University, Trabzon, Turkey

Associate Professor, Department of Electrical & Electronics Engineering, Karadeniz Technical University, Trabzon, Turkey

14.

Control of the Energy Flow with PLC for Fuel Cell Supported Wind and Solar Hybrid Generation System

Yavuz Bahadır Koca, Ahmet Yönetken, Yüksel Oğuz

Lecturer, Department of Electronics and Automation, Afyon Kocatepe University, Afyonkarahisar, Turkey

Assistant Professor, Department of Electrical Engineering, Afyon Kocatepe University, Afyonkarahisar, Turkey

Associate Professor, Department of Electrical and Electronics Engineering, Afyon Kocatepe University, Afyonkarahisar, Turkey

15.

Structural Optimization of Cold-Formed Steel Frames to AISI-LRFD

Serdar Carbas

Assistant Professor, Department of Civil Engineering, Karamanoglu Mehmetbey University, Karaman, Turkey

16.

Regional Flow Duration Curves for Seyhan and Ceyhan Basins

Halil Ibrahim Burgan, Hafzullah Aksoy

PhD Student, Department of Civil Engineering, Istanbul Technical University, Maslak, Istanbul, Turkey

Professor, Department of Civil Engineering, Istanbul Technical University, Maslak, Istanbul, Turkey

17.

Investigation of Wind Characteristics for Bergama in Terms of Wind Energy

VeliYavuz, Ali Deniz, Pelin Cansu Çavuş, Nida Doğan, İbrahim Akbayır

Department of Meteorological Engineering, Faculty of Aeronautics and Astronautics, Istanbul Technical University, , Istanbul, Turkey

18.

Comparison of Three Stations’ PM10 Data for Istanbul, Turkey

Pelin Cansu Çavuş, Ali Deniz, Nida Doğan, İbrahim Akbayır, Veli Yavuz

Department of Meteorological Engineering, Faculty of Aeronautics and Astronautics, İstanbul Technical University, Istanbul, Turkey

19.

Production of Al-Ni-B4C-Al2o3–Si3N4 Composite and Investigation of Mechanical Properties

Ahmet YÖNETKEN Ayhan EROL

Engineering Faculty, Afyon Kocatepe University, 03200, Afyonkarahisar, Turkey,

Technology Faculty, Afyon Kocatepe University, 03200, Afyonkarahisar, Turkey

20.

The Conjugated Linoleic Acid (CLA) Contents of Various Milk and Dairy Products and Affecting Factors

Günnur Peşmen

Afyon Kocatepe University, Faculty of Veterinary, Turkey

21.

Effect of Button Geometry on TRIP800 Steel Resistance Spot Weldment

Hayriye Ertek Emre, Ramazan Kaçar

Research Asistant, Department of Manufacturing Engineering, Karabük University, Karabük, Turkey

Professor, Department of Manufacturing Engineering, Karabük University, Karabük, Turkey

22.

Production Line Analysis via Value Stream Mapping: A Case Study in Pakistani Manufacturing Firm

Zanjbeel Tabassum, Alyaan Khan

Graduate Student, Department of Industrial Engineering, Istanbul Technical University, Turkey

Graduate Polymer Science and Technology, Middle East Technical University, Turkey

23.

Effect of Some Parameters on Exergetic Efficiency of a Combustion System in a Petrochemical Plant

Selay Sert, Firuz Balkan

MSc Student, Department of Chemical Engineering, Ege University, İzmir, Turkey

Professor, Department of Chemical Engineering, Ege University, İzmir, Turkey

24.

Optimal Control of Output Signal of a Chaotic Oscillator Using Genetic Algorithm Based Discrete Time PI Controller

Aydın Mühürcü, Ercan Köse

Assistant Professor, Department of Electrical and Electronic Engineering, Sakarya University, Turkey

Assistant Professor, Department of Mechatronic Engineering, Mersin University, Tarsus, Mersin, Turkey

25.

Extraction of Essential Oil from Albanian Chamomile (Matricaria recutita L.) by a Hydro Distillation Method and its Characterization by FTIR Spectroscopy

Lorena Ciko, Adelaida Andoni, Fatos Ylli, Ervisjana Plaku

University of Tirana, Faculty of Natural Sciences, Department of Chemistry, Tirana, Albania

University of Tirana, Institute of Applied Nuclear Physics, P.O. Box 85, Tirana, Albania

26.

Effect of the Manufacturing Parameters on Tribological Properties of Compacted Copper and Bronze Powders

Hüseyin İpek, HamdullahÇuvalcı, Cemal Çelebi

PhD Student, Faculty of Engineering, Metallurgical and Materials Engineering College, Trabzon, Turkey

Associate Professor, Faculty of Engineering, Metallurgical and Materials Engineering College, Trabzon, Turkey

Certificated Engineer, Gaziantep, Turkey

27.

Approximate Analytical Solution to Nonlinear Buckling of Graphene Beam

Mohammed Ghazy, Mohamed Elgindi, Dongming Wei

Assist. Professor, Department of Aeronautical Engineering, Necmettin Erbakan University (on leave from Alexandria University, Egypt)

Professor, Department of Mathematics, Texas A&M University-Qatar, Qatar

Professor, Department of Mathematics, Nazarbayev University, Kazakhstan

28.

Synthesis, Characterization and Comparison of Cr-SBA-15 Materials Synthesized by Direct Hydrothermal Synthesis Method

Tuğba Yarbaş, Alime Çıtak

Phd. Student, Department of Chemical and Process Engineering, Bilecik Seyh Edebali University, Bilecik, Turkey

Associate Professor, Department of Chemical Engineering, Eskişehir Osmangazi University, Eskişehir, Turkey

29.

Effect of Carbon Black on the Dynamic Mechanical Properties of Magnetorheological Elastomers

S. RaaKhimi, K.L Pickering

School of Materials and Mineral Resources Engineering, USM Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia

School of Engineering, The University of Waikato, Hamilton, 3216, New Zealand

30.

Study Dynamic Regime of a Electromagnet Using Finite Element Method

Horgos Mircea, Erdei Zoltan, Barz Cristian

Associate Professor PhD, Department of Electrical Engineering, Electronics and Computers, Tehnical University of Cluj Napoca, North University Center of Baia Mare

Lecturer PhD, Department of Electrical Engineering, Electronics and Computers, Tehnical University of Cluj Napoca, North University Center of Baia Mare

Lecturer PhD, Department of Electrical Engineering, Electronics and Computers, Tehnical University of Cluj Napoca, North University Center of Baia Mare

31.

Comparison of Different Methods in Estimating Weibull Distribution Parameters for Wind Power Application

Yusuf Alper KAPLAN,Canan ALADAĞ

Assistant Professor, Department of Energy Engineering, Osmaniye Korkut Ata University, Osmaniye Turkey

Research Assistant, Department of Energy Engineering, Osmaniye Korkut Ata University, Osmaniye, Turkey