Low Processing Fee Journal in Engineering : Impact Factor: 8.524

Special Issue TAPSA 2014

Second National Conference on Trends in Automotive Parts Systems and Applications (TAPSA-2014)

Organized by

Society of Automotive Engineers India
Of
Sri Krishna College of Engineering & Technology, Kuniamuthur, Coimbatore-641008, Tamilnadu, India

Date: 21st & 22nd March 2014

1.	Design and Development of a Dielectric Sensor to measure the alcohol concentration on Flexible Fuel Vehicles B.Vasanthan, G.Devaradjane, G.Yogeshwaran, S.Senthilkumar Teaching Fellow, Dept. of Automobile, Madras Institute of Technology, Anna University, Chennai Professor & Head, Dept. of Automobile, Madras Institute of Technology, Anna University, Chennai PG Student [Automobile] , Dept. of Automobile ,Madras Institute of Technology, Anna University, Chennai UG Student [Automobile] , Dept. of Automobile ,Madras Institute of Technology, Anna University, Chennai Abstract
2.	Location Sensitive Speed Adaptation System for Automobiles S.Sanjay pramanathan, P M Santhosh Kumar UG Student, Dept. of Mechanical engineering, Sri Muthukumaran Institute of technology, Chennai, Tamil Nadu, India UG Student, Dept. of Mechanical engineering, Sri Muthukumaran Institute of technology, Chennai, Tamil Nadu, India Abstract
3.	Increasing the Efficiency of an Engine by the use of Variable Geometry Turbochargers Srinivasan.C, M.S.Sayooj UG Student[MECH], Dept. of MechEngg,SNS College of Engineering, Coimbatore, Tamilnadu, India UG Student[MECH] , Dept. of MechEngg, SNS College of Engineering, Coimbatore, Tamilnadu, India Abstract
4.	Semi Automatic Clutch in Heavy Vehicles N.Prasanth, M.Arun, R.Balagurubaran D.Sabarish, Dr.R.Kirubashankar UG Student, Department of Mechatronics Engineering, Kongu Engineering College, Erode ,Tamilnadu ,India Asst. Prof, Department of Mechatronics Engineering, Kongu Engineering College, Erode ,Tamilnadu ,India Abstract
5.	COMPOUND FORCED INDUCTION SYSTEM: TWINCHARGER V.Kumaresh, S.Madhan UG Student, Dept. of Automobile Engineering, Tamilnadu College of Engineering, Coimbatore, Tamilnadu, India UG Student, Dept. of Automobile Engineering, Tamilnadu College of Engineering, Coimbatore, Tamilnadu, India Abstract
6.	Thermal And Stress Distribution Of Different I.C. Engine Piston Combustion Chambers Using 3-D Finite Element Analysis Method Dr .G.R.Kannan , Anoop Aravind Professor, Dept. of Mechanical Engineering , PSNA College of Engineering & Tech,Dindigul,Tamilnadu,India. PG Student [ED]Dept. of Mechanical Engineering,PSNA College of Engineering &Tech,Dindigul,Tamilnadu,India Abstract
7.	Carbon Capture And Storage From Automobile Exhaust To Reduce Co₂ Emission S.JENORIS MUTHIYA, V.AMARNATH, P.SENTHIL KUMAR, S.MOHAN KUMAR PG Student, Dept. of Automobile Engineering, MIT, Anna University, Chennai Research scholar, Dept. of Automobile Engineering, MIT, Anna University, Chennai. Assistant Professor, Dept. of Automobile Engineering, MIT, Anna University, Chennai. Research scholar, Dept. of Automobile Engineering, MIT, Anna University, Chennai Abstract
8.	Performance Testing Of Diesel Engine With Tio₂coated Engine Parts A.R.Danavignesh, S.Siddarda, S. Karthickeyan, M.Prakash vasanth, Dr.S.Sivasankaran UG Student, Dept. of Mechanical Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, India UG Student, Dept. of Mechanical Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, India UG Student, Dept. of Mechanical Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, India UG Student, Dept. of Mechanical Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, India Associate Professor, Dept. of Mechanical Engineering, KPR Institute of Engineering and Technology, Arasur, Coimbatore, India Abstract
9.	Innovative Electro Magnetic Braking System Sevvel P, Nirmal Kannan V, Mars Mukesh S Associate Professor, Dept. of Mech Engg, Magna College of Engineering, Chennai, Tamilnadu, India Associate Professor, Dept. of Mech Engg, Magna College of Engineering, Chennai, Tamilnadu, India UG Student, Dept. of Mech Engg, Magna College of Engineering, Chennai, Tamilnadu, India Abstract
10.	An Experimental Assessment of Performance and Exhaust Emission Characteristics by addition of Hydroxy (HHO) gas in Twin cylinder C.I. Engine DweepsonS. Chinnasamy Subramanian, J. Ashok kumar S. Post Graduate Student [M.E. Internal Combustion Engineering] - Department of Mechanical Engineering, Velammal Engineering College, Chennai - 600 066, Tamil Nadu, India Assistant Professor - Department of Mechanical Engineering, Velammal Engineering College, Chennai - 600 066, Tamil Nadu, India Abstract
11.	SMS Based Automatic Vehicle Accident Information System R.Sridhar, A. Sri Vignesh prasanth, M. Pranesh, S.Gowtham, S.K.Thangarasu UG Scholar, Dept of Mechatronics, Kongu Engineering College, Erode,Tamilnadu, India UG Scholar, Dept of Mechatronics, Kongu Engineering College, Erode,Tamilnadu, India UG Scholar, Dept of Mechatronics, Kongu Engineering College, Erode,Tamilnadu, India UG Scholar, Dept of Mechatronics, Kongu Engineering College, Erode,Tamilnadu, India Assistant Professor, Dept of Mechatronics, Kongu Engineering College, Erode, Tamilnadu, India Abstract
12.	DESIGN AND ANALYSIS OF ALLOY WHEEL RIM V.Karthi, N. Ramanan, J. Justin Maria Hillary. Assistant professor, Dept Of Mechanical Engineering , Sri Krishna college of engineering and Technology, Coimbatore, Tamilnadu , India PG student, [Engineering Design] , MNM JAIN engineering college , Coimbatore, Tamilnadu , India PG student , [Engineering Design], Sri Krishna college of engineering and Technology, Coimbatore, Tamilnadu, India Abstract
13.	Hybrid Light-Weight Transmission Mithun Vaisnav S Department of Automobile Engineering, Kumaraguru College of Technology Coimbatore, Tamil Nadu, India Abstract
14.	STUDY ON APPLICATION OF GENETIC ALGORITHM IN CONSTRUCTION RESOURCE LEVELLING N.Satheesh Kumar, R.Raj Kumar PG Student, Department of Civil Engineering, Kongu Engineering College, Perundurai, Tamilnadu,India Assistant professor, Department of Civil Engineering, Kongu Engineering College, Perundurai, Tamilnadu,India Abstract
15.	Study On Properties Of High Strength Silica Fume Concrete Withpolypropylene Fibre R.Karthi, Dr. P. Chandrasekaran PG Student, Department of Civil Engineering, Kongu Engineering College, India. Professor, Department of Civil Engineering, Kongu Engineering College,India. Abstract
16.	Experimental Investigation of Fibre Reinforced Concrete with Partial Replacement of Coarse Aggregate by Steel Slag N.Manoj, N.Nandhini PG Student, Department of Civil Engineering, Kongu Engineering College, India. Assistant Professor, Department of Civil Engineering, Kongu Engineering College, India. Abstract
17.	Study on The Properties Of High Strength Concrete Using Glass Powder And Lathe Scrap T.Sezhiyan, R.Rajkumar PG scholar, Department of Civil Engineering, Kongu Engineering College, Perundurai, Tamilnadu,India Assistant Professor, Department of Civil Engineering, Kongu engineering College, Perundurai. Tamilnadu, India Abstract
18.	Study on Chemical Resistance Property of Concrete With Silica Fume J.O.Lovelya, Dr.P.Chandrasekaran PG Student, Department of Civil Engineering, Kongu Engineering College,Perundurai, Tamilnadu,India Professor, Department of Civil Engineering, Kongu Engineering College, Perundurai, Tamilnadu,India Abstract
19.	Study on Mechanical properties of Geo Polymer Concrete Using M-Sand and Glass Fibers P.Vignesh, A.R.Krishnaraja, N.Nandhini PG scholar, Department of Civil Engineering, Kongu engineering College, India Assistant Professor, Dept. of Civil Engineering, Kongu engineering College, India Abstract
20.	Fuzzy Relational Clustering Algorithm Based Multi-Agent Systems Eniya.M, Vinoth Kumar.M PG Student [CSE], Dept. of CSE, K.S.R. College of Engineering, Tiruchengode, Tamilnadu, India Assistant Professor, Dept. of CSE, K.S.R. College of Engineering, Tiruchengode, Tamilnadu, India Abstract
21.	Evaluation of Probabilistic Top-k Queries in Wireless Sensor Network by Expected Ranking Method Shanmuga priya.k, Manopriya.M PG Student [CSE], Dept. of CSE, K.S.R College of Engineering, Tiruchengode, Tamilnadu, India Assistant Professor, Dept. of CSE, K.S.R College of Engineering, Tiruchengode, Tamilnadu, India Abstract
22.	Comparative Analysis of Image Compression Using Wavelet and Ridgelet Transform Thaarini.P, Thiyagarajan.J PG Student, Department of EEE, K.S.R College of Engineering, Thiruchengode, Tamil Nadu, India Assistant Professor, Department of EEE, K.S.R College of Engineering, Thiruchengode, Tamil Nadu, India Abstract
23.	Emerging Era in Transmission of Confidential Information R.Surendran, A.Lavanya, V.Logeswari, V.Malathidevi Asst.Professor, Dept. of ECE, K.S.R College of engineering, Namakkal, Tamil nadu, India UG Students, Dept. of ECE, K.S.R College of engineering, Namakkal, Tamil nadu, India Abstract
24.	Identification of the Presence of Train and its Formation Pavithradevi. V, Roopini. D, Rumana Vaseela Abdul Aleem, Solai Shree. V UG Student, Dept. of ECE, Sri Ramakrishna Institute of Technology, Coimbatore, TamilNadu, India. UG Student, Dept. of ECE, Sri Ramakrishna Institute of Technology, Coimbatore, TamilNadu, India UG Student, Dept. of ECE, Sri Ramakrishna Institute of Technology, Coimbatore, TamilNadu, India UG Student, Dept. of ECE, Sri Ramakrishna Institute of Technology, Coimbatore, TamilNadu, India. Abstract
25.	Production of Solar Energy Using Nanosemiconductors Kiruthika S , Dinesh Kumar M, Surendar.A II year , KSR College of Engineering, Tiruchengode, Tamilnadu, India Assistant Professor, KSR College of Engineering, Tiruchengode, Tamilnadu, India Abstract
26.	Modeling and Simulation of Capacitive Pressure Sensor Using Comsol Multiphysics for Intraoral Applications K.Sathesh, Dr.N.J.R.Muniraj, T.Divya Bharathi, S.Priyadarshini, S.Sharmila Research Scholar, Anna University, Chennai, India Principal,Tejaa Shakthi Institute of Technology for Women, Coimbatore, India Department of Electronics and Communication Engineering, Anna University, Tejaa Shakthi Institute of Technology for Women, Coimbatore, India. Abstract
27.	Traffic Density Count by Optical Flow Algorithm using Image Processing Dharani.S.J, Anitha.V PG Student [EST], Dept. of EEE, R.V.S College of Engg & Tech , Coimbatore, Tamil Nadu, India PG Student [EST], Dept. of EEE, R.V.S College of Engg & Tech , Coimbatore, Tamil Nadu, India Abstract
28.	Computer Vision Controlled Automated Paint Sprayer Using Image Processing And Embedded System M. Joseph Kohilan, G. Thenmozhi M.Tech., Final year BE, Dept. of ECE, Professional Group of Institutions, Tamilnadu, India Assistant Professor, Dept. of ECE, Professional Group of Institutions, Tamilnadu, India Abstract
29.	Effectual Multiprocessor Scheduling Based on Stochastic Optimization Technique A.Gowthaman, P.Nithiyanandham PG Student [VLSI] , Dept. of ECE, Sathyamabama University,Chennai , Tamil Nadu, India PG Student [VLSI] , Dept. of ECE, Sathyamabama University,Chennai , Tamil Nadu, India Abstract
30.	ENLIGHTENMENT THROUGH LIGHT – A HEURISTIC APPROACH TO DATA TRANSMISSION Kavin Balaji, Venkatesh, Vetriyvel, Nithyavathy, Arunkumar UG Student, Dept. Of Mechatronics, Kongu Engineering College, Perunduari, Tamil Nadu, India UG Student, Dept. Of Mechatronics, Kongu Engineering College, Perunduari, Tamil Nadu, India UG Student, Dept. Of Mechatronics, Kongu Engineering College, Perunduari, Tamil Nadu, India Assistant Professor (Sr.G), Dept. Of Mechatronics, Kongu Engineering College, Perunduari, Tamil Nadu, India Assistant Professor, Dept. Of Mechatronics, Kongu Engineering College, Perunduari, Tamil Nadu, India Abstract
31.	Analysis of Marix Converter with Various Inputs Using Power Simulation N.Sathish, S.Elango Assistant Professor, Dept. Of ECE, Sri Krishna College of Engineering And Technology, Coimbatore,Tamilnadu,India Assiatant Professor,Dept of EEE, Coimbatore Institute of Technology, Coimbatore,Tamilnadu,India Abstract
32.	Dye Sensitized Solar Cell Gowtham Sankar, Ilansuriyan Thenarasu, Hemnath Natarajan UG Student [EEE], R.M.K Engineering College, Thiruvallur District, Tamil Nadu, India UG Student [EEE], R.M.K Engineering College, Thiruvallur District, Tamil Nadu, India UG Student [EEE], R.M.K Engineering College, Thiruvallur District, Tamil Nadu, India Abstract
33.	Fuzzy Logic based Soft Starting of Three Phase Induction Motor Mohamed Wasim Ansari.K, Mohanasundaram.K, Mohan.C UG Student, Dept. Of EEE, R.M.K Engineering College, Tiruvallur, Tamil Nadu, India Associate Professor, Dept. Of EEE, R.M.K Engineering College, Tiruvallur, Tamil Nadu, India UG Student, Dept. Of EEE, R.M.K Engineering College, Tiruvallur, Tamil Nadu, India Abstract
34.	Vehicle Scrutinizing using GPS & GSM Technologies Implemented with Ardunio controller A.Kalaiarasi, Raviram.P, Prabakaran. P M, ShanthoshKumar.K, Dheeraj B P Assistant Professor, Dept. of EEE, R.V.S College of Engineering & Technology, Coimbatore, Tamil Nadu, India ME [EST] Dept. of EEE, R.V.S College of Engineering & Technology, Coimbatore, Tamil Nadu, India ME [EDES], Dept. of EEE, R.V.S College of Engineering & Technology, Coimbatore, Tamil Nadu, India ME [EST], Dept. of EEE, R.V.S College of Engineering & Technology, Coimbatore, Tamil Nadu, India ME [EST], Dept. of EEE, R.V.S College of Engineering & Technology, Coimbatore, Tamil Nadu, India Abstract
35.	A New Multilevel Inverter Topology for DC-AC Conversion Premananth.P, Chitrapreyanka.S.B PG Scholar, Department of Electrical and Electronics Engineering, K.S.R. College of Engineering (Autonomous),Tiruchengode, Tamil Nadu, India. Assistant Professor, Department of Electrical and Electronics Engineering, K.S.R. College of Engineering (Autonomous),Tiruchengode, Tamil Nadu, India. Abstract
36.	Design of Monitoring System and Fault Diagnosis in Wind Turbine Based On Can Bus Using ARM L.Senthil Murugan, K.S.AswathRangaraj, D.Mathesh Assistant Professor, Department of EEE, RVS College Of Engineering And Technology, Coimbatore, Tamil Nadu, India PG SCHOLAR [Embedded System Technologies], Department of EEE, RVS College Of Engineering And Technology, Coimbatore, Tamil Nadu, India Abstract
37.	Design and Implementation of space Vector Modulated Three Level Inverter with Quasi-Z-Source Network Ranjutha.G, Kumaresan.R PG Student [PED], Dept. of EEE, KSR College of Engineering, Thiruchengode, Tamilnadu, India Assistant professor, Dept. of EEE, KSR College of Engineering, Thiruchengode, Tamilnadu, India Abstract
38.	A Novel Approach for Recognizing Facial Structures Using Extreme Learning Machine Algorithm S.Sanjul, C. Gowrishankar PG Scholar (Applied Electronics), Department of Electrical and Electronics Engineering, KSR College of Engineering (Autonomous), Tiruchengode, TamilNadu, India Associate Professor, Department of Electrical and Electronics Engineering, KSR College of Engineering (Autonomous), Tiruchengode, TamilNadu, India Abstract
39.	Health Assessment for Structures Using MEMS Technology Dr.N.Kottiswaran, K.A.Jayabalaji, S.Deepak, S.Priyadarshini Principal, Sengunthar Engineering College, Thiruchengode, India Research Scholar, Anna University, Chennai, India Department of Civil Engineering, Anna University, Sengunthar Engineering College, Thiruchengode, India Department of Electronics and Communication Engineering, Anna University, Tejaa Shakthi Institute of Technology for Women, Coimbatore, India Abstract
40.	Design and development of semi-automatic bot for agricultural applications S.Karthikeyan, E.Praveen Kumar, C.Nithyanandham, A.Muthukrishnan, A.Tony Thomas, S.Praveen Kumar UG Scholar, Dept. of Mechatronics Engineering, Kongu Engineering College, Erode, Tamilnadu, India Assistant Professor, Dept. of Mechatronics Engineering, Kongu Engineering College,Erode,Tamilnadu, India Abstract
41.	Design and Fabrication of Hydraulic Rod Bending Machine I.Muhammed Hanoof, S.Ravi Vishwanth, P.Sureshkumar, N.Saravanan UG Scholar, Dept. of Mechanical Engineering, Kongu Engineering College, Erode, Tamilnadu, India Assistant Professor, Dept. of Mechanical Engineering, Kongu Engineering College, Erode, Tamilnadu, India Abstract
42.	CFD Analysis of Application of Phase Change Material in Automotive Climate Control Systems Vijayakumar Nachimuthu, Prabhu Mani, Muthukumar. P Flowxplore, Coimbatore, India., Kathir College of Engineering, Coimbatore, India Kathir College of Engineering, Coimbatore, India Abstract
43.	AGILE MANUFACTURING IN SMALL AND MEDIUM SCALE ENTERPRISES T.Varun Kumar, Dr.B.Ganesh Babu, Dr.M.Saravanan, Dr.M.Murugan Research Scholar(PT), Dept. of Mechanical Engg., Roever College of Engg&Technology,Perambalur, INDIA Principal, Roever College of Engg & Technology, Perambalur, INDIA Principal, C.R College of Engineering, Madurai, INDIA Principal, RathinamInstitue of Technology, Coimbatore, INDIA Abstract
44.	Design and Fabrication of Automated Hacksaw Machine D.V.Sabariananda, V.Siddhartha, B.Sushil Krishnana, T.Mohanraj UG Student [Mechatronics], Dept. of Mechatronics Engineering, Kongu Engineering College, Erode, Tamilnadu, India Assistant Professor, Dept. of Mechatronics Engineering, Kongu Engineering College, Erode, Tamilnadu, India Abstract
45.	Convective heat transfer enhancement of graphite nanofluids in shell and tube heat exchanger V.SanthoshCibi, K.Gokul raj, P.Kathiravan, R.RajeshKanna B.Ganesh, Dr. S.Sivasankaran, V.VedhagiriEswaran Student, Final Year, mechanical engineering, KPR institute of engineering and technology, Tamilnadu, India Assistant Professor, KPR institute of engineering and technology, Tamilnadu, India Associate Professor, KPR institute of engineering and technology, Tamilnadu, India Principal, Kongu Polytechnic College, Erode, Tamilnadu, India Abstract
46.	Reduction of Shaft failure in Wind Turbine N. Aravindkumar, K. Chithiraiselva, K.Prakash, P.A. Praveen PG Scholar, Dept. of Mechanical, Sri Krishna College of Engineering and Technology, Coimbatore,India UG Scholar, Dept. of Mechanical, P.A College of Engineering and Technology, Coimbatore,India Abstract
48.	DESIGN AND FABRICATION OF ADJUSTABLE UNIFIED WHEEL OPENER R. Sivabala, M. Vignesh, S. Vairamuthu, M. Shahul Hameed UG Student, Dept. of Mechanical, Kongu Engineering College, Erode, Tamilnadu, India UG Student, Dept. of Mechanical, Kongu Engineering College, Erode, Tamilnadu, India UG Student, Dept. of Mechanical, Kongu Engineering College, Erode, Tamilnadu, India UG Student, Dept. of Mechanical, Kongu Engineering College, Erode, Tamilnadu, India Abstract
49.	Analyzing, Validating the Waste Elimination by Implement the Lean Principles for the Production of Wind Mill Gear Box S.Duraisivam, N.Gurumoorthi Assistant Professor, Department of Mechanical Engineering, The Kavery Engineering College, Tamilnadu, India Abstract
50.	Characterization And Corrosion Behavior Of Manual Metal Arc P91 Weldment By Using Dilute H2So4 E.Hariharan, E.Jamuna Assistant Professor, Department of Mechanical Engineering, Annai Mathammal Sheela Engineering College, Tamilnadu,India Assistant Professor, Department of Mechanical Engineering, The Kavery Engineering College.Tamilnadu,India Abstract
51.	AN EXPRIMENTAL STUDY Energy multiplication by using turbine setup V.Saravanan, G.Loganathan Assistant Professor, Department of Mechanical Engineering, The Kavery College of Engineering, Tamilnadu, India PG Student, Department of Mechanical Engineering ,The Kavery College of Engineering , Tamilnadu, India Abstract
52.	Experimental Investigation and Analysis of Air with Water Mist Wire Cut Electrical Discharge Machining Process Using RSM Methodology G.M.Pradeep Velammal Institute of technology, Department of Mechanical Engineering, Chennai, Tamilnadu, India Abstract
53.	5S Implementation Studies in Biomass Processing Unit K.Ramesh, V.R.Muruganantham, N.R.Arunkumar P.G Student, Department Of Mechanical Engineering, Kumaraguru College Of Technology, Coimbatore, India Senior Grade Assistant Professor, Department Of Mechanical Engineering, Kumaraguru College Of Technology, Coimbatore, India P.G Student, Department Of Mechanical Engineering, Kumaraguru College Of Technology, Coimbatore, India Abstract
54.	Rapid Prototyping of Human Implants with Case Study Varatharaj Kannan. S, Yogasundar. S. T, Suraj Singh. R, Tamilarasu. S, Bhuvanesh Kumar. M UG Student, Dept. of Mechanical Engineering, Kongu Engineering College, Perundurai, Tamilnadu, India UG Student, Dept. of Mechanical Engineering,Kongu Engineering College, Perundurai, Tamilnadu, India UG Student, Dept. of Mechanical Engineering, Kongu Engineering College, Perundurai, Tamilnadu, India UG Student, Dept. of Mechanical Engineering, Kongu Engineering College, Perundurai, Tamilnadu, India Assistant Professor, Dept. of Mechanical Engineering, Kongu Engineering College, Perundurai, Tamilnadu, India Abstract
55.	Analysis and Implementation of Total Productive maintenance, Kanban and JIT Systems In Small Scale Polymer Industry V.R.Muruganantham, M. Sindhu Kavi, S.Raghavendra Prabhu Senior Grade Assistant Professor, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India P.G Student, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India P.G Student, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India Abstract
56.	Analysis and Implementation of Total Productive maintenance, Kanban and JIT Systems in Small Scale Polymer Industry V.R.Muruganantha, M. Sindhu Kavi, S.Raghavendra Prabhu Senior Grade Assistant Professor, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India P.G Student, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India P.G Student, Department of Mechanical Engineering, Kumaraguru College of Technology, Coimbatore, India Abstract
57.	Fabrication of AA6016/ (Al2O3+AlN) Hybrid Surface Composite Using Friction Stir Processing Keerthivel Rajesh.E, Prem Kumar.N, Srinath Kumar.S First year PG student, Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India First Year PG student, Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India First Year PG student, Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India Abstract
58.	DESIGNING A METHOD FOR SOLVING QUALITY, COST & DELIVERY PROBLEM'S IN SMEs To Enable Implementation of Agile / Lean Manufacturing T.Varun Kumar, Gopinath.K, Vijay Radhakrishnan.V, Yasodharan.K Research Scholar(PT), Dept. of Mechanical Engg, Roever College of Engg &Technology,Perambalur, India P.A. College of Engg & Technology, Pollachi, India Abstract

Submission	:	31st Dec 2024
Notification	:	24 Hours
Publication	:	12 to 24 hours
E-Certificates	:	Immediate

Recent News

Call for Papers

Vol. 13, Issue 12, Dec 2024

Authors Desk

IJIRSET Citation Report

Downloads

Special Issues

IJIRSET Administration

Archives

Special Issue TAPSA 2014

Second National Conference on Trends in Automotive Parts Systems and Applications (TAPSA-2014)

Organized by

Society of Automotive Engineers India Of Sri Krishna College of Engineering & Technology, Kuniamuthur, Coimbatore-641008, Tamilnadu, India

Date: 21st & 22nd March 2014

Design and Development of a Dielectric Sensor to measure the alcohol concentration on Flexible Fuel Vehicles

B.Vasanthan, G.Devaradjane, G.Yogeshwaran, S.Senthilkumar

Location Sensitive Speed Adaptation System for Automobiles

S.Sanjay pramanathan, P M Santhosh Kumar

Increasing the Efficiency of an Engine by the use of Variable Geometry Turbochargers

Srinivasan.C, M.S.Sayooj

Semi Automatic Clutch in Heavy Vehicles

N.Prasanth, M.Arun, R.Balagurubaran D.Sabarish, Dr.R.Kirubashankar

COMPOUND FORCED INDUCTION SYSTEM: TWINCHARGER

V.Kumaresh, S.Madhan

Thermal And Stress Distribution Of Different I.C. Engine Piston Combustion Chambers Using 3-D Finite Element Analysis Method

Dr .G.R.Kannan , Anoop Aravind

Carbon Capture And Storage From Automobile Exhaust To Reduce Co2 Emission

S.JENORIS MUTHIYA, V.AMARNATH, P.SENTHIL KUMAR, S.MOHAN KUMAR

Performance Testing Of Diesel Engine With Tio2coated Engine Parts

A.R.Danavignesh, S.Siddarda, S. Karthickeyan, M.Prakash vasanth, Dr.S.Sivasankaran

Innovative Electro Magnetic Braking System

Sevvel P, Nirmal Kannan V, Mars Mukesh S

An Experimental Assessment of Performance and Exhaust Emission Characteristics by addition of Hydroxy (HHO) gas in Twin cylinder C.I. Engine

DweepsonS. Chinnasamy Subramanian, J. Ashok kumar S.

SMS Based Automatic Vehicle Accident Information System

R.Sridhar, A. Sri Vignesh prasanth, M. Pranesh, S.Gowtham, S.K.Thangarasu

DESIGN AND ANALYSIS OF ALLOY WHEEL RIM

V.Karthi, N. Ramanan, J. Justin Maria Hillary.

Hybrid Light-Weight Transmission

Mithun Vaisnav S

STUDY ON APPLICATION OF GENETIC ALGORITHM IN CONSTRUCTION RESOURCE LEVELLING

N.Satheesh Kumar, R.Raj Kumar

Study On Properties Of High Strength Silica Fume Concrete Withpolypropylene Fibre

R.Karthi, Dr. P. Chandrasekaran

Experimental Investigation of Fibre Reinforced Concrete with Partial Replacement of Coarse Aggregate by Steel Slag

N.Manoj, N.Nandhini

Study on The Properties Of High Strength Concrete Using Glass Powder And Lathe Scrap

T.Sezhiyan, R.Rajkumar

Study on Chemical Resistance Property of Concrete With Silica Fume

J.O.Lovelya, Dr.P.Chandrasekaran

Study on Mechanical properties of Geo Polymer Concrete Using M-Sand and Glass Fibers

P.Vignesh, A.R.Krishnaraja, N.Nandhini

Fuzzy Relational Clustering Algorithm Based Multi-Agent Systems

Eniya.M, Vinoth Kumar.M

Evaluation of Probabilistic Top-k Queries in Wireless Sensor Network by Expected Ranking Method

Shanmuga priya.k, Manopriya.M

Comparative Analysis of Image Compression Using Wavelet and Ridgelet Transform

Thaarini.P, Thiyagarajan.J

Emerging Era in Transmission of Confidential Information

R.Surendran, A.Lavanya, V.Logeswari, V.Malathidevi

Identification of the Presence of Train and its Formation

Pavithradevi. V, Roopini. D, Rumana Vaseela Abdul Aleem, Solai Shree. V

Production of Solar Energy Using Nanosemiconductors

Kiruthika S , Dinesh Kumar M, Surendar.A

Modeling and Simulation of Capacitive Pressure Sensor Using Comsol Multiphysics for Intraoral Applications

K.Sathesh, Dr.N.J.R.Muniraj, T.Divya Bharathi, S.Priyadarshini, S.Sharmila

Traffic Density Count by Optical Flow Algorithm using Image Processing

Dharani.S.J, Anitha.V

Computer Vision Controlled Automated Paint Sprayer Using Image Processing And Embedded System

M. Joseph Kohilan, G. Thenmozhi M.Tech.,

Effectual Multiprocessor Scheduling Based on Stochastic Optimization Technique

A.Gowthaman, P.Nithiyanandham

ENLIGHTENMENT THROUGH LIGHT – A HEURISTIC APPROACH TO DATA TRANSMISSION

Kavin Balaji, Venkatesh, Vetriyvel, Nithyavathy, Arunkumar

Analysis of Marix Converter with Various Inputs Using Power Simulation

N.Sathish, S.Elango

Dye Sensitized Solar Cell

Gowtham Sankar, Ilansuriyan Thenarasu, Hemnath Natarajan

Fuzzy Logic based Soft Starting of Three Phase Induction Motor

Mohamed Wasim Ansari.K, Mohanasundaram.K, Mohan.C

Society of Automotive Engineers India
Of
Sri Krishna College of Engineering & Technology, Kuniamuthur, Coimbatore-641008, Tamilnadu, India

Carbon Capture And Storage From Automobile Exhaust To Reduce Co₂ Emission

Performance Testing Of Diesel Engine With Tio₂coated Engine Parts